TRAFIC · PRIMASTAR · NV300
TALENTO · VIVARO
REAR TENT - CABIN

The MULTICABIN M1 rear tent has been designed for the PRIMASTAR, TRAFIC, VIVARO, TALENTO and NV300 TAILGATE DOOR models.

 

PACK AWNING that turns the front door of your cabin into a practical awning to protect against the sun or rain, increasing the space of comfort in your camping.

MULTI CABIN M1 tailgate

169,00 €

  • 2,5 kg
  • envío - shipping 4/10days


PRODUCT DETAILS

 

The innovative design of our tent model uses the rear doors as support elements, without the need of complex structures (poles) that give shape and rigidity to the cab, in order to favor speed and ease of assembly.

 

This fastening method allows you to install the rear tent even if your camper van has a bike rack.  Furthermore, with our design, the door glass is not covered to guarantee great luminosity inside the tent.

 

Another differentiating element of this tent is the separation panel between the awning area and the vehicle, as standard. This connection curtain can be closed or opened. Depending on the position (open / close) allows to use the tent: 1) as a separate room from the vehicle, as a shower, dressing room, toilet, etc. and 2) as an awning or extension of the camper van allowing access to the interior of it regardless of the configuration of your camper (drawers, bed, etc.)

 

The tent has access from both the front and the side, the two of them with mosquito nets. This configuration allows the user to adapt to any van furniture distribution.

 

 Access to the cabin is from the front through a large door with a mosquito net that provides excellent ventilation and even visibility from inside the van when the divider is open.

The large front door can become a canopy thanks to the eyelets in its lower part, which allows inserting metal camping poles.

 

The second access is on the right side of the tent, through another generous zippered door with a mosquito net and double metal puller.

 

The sides of the cabin include a vertical velcro to fasten it to the frame of the rear compartment of your camper. We do not add the velcro to stick inside the vehicle so, you can choose the color that best suits the interior design of your camper van.

The interior of the cabin also includes velcro stripes on which you can hang different ACCESSORIES to organize and optimize the space.

 

The included fiberglass rods form a frame at the bottom of the tent and keep the tent in shape even if you use it on windy days. This solution is especially useful if you are camping in areas with the hard ground where you cannot pound tent pegs.

 

In any case, we include four (4) metal tent pegs to use on soft ground.

 

Renault Trafic since 2002.
Opel Vivaro: 2002-2019.
Nissan Primastar 2002-2014.
Nissan NV300 from 2016.
Fiat Talento since 2016.

MOUNTING

 

With the tailgate raised almost entirely, place the front of the tent over the bottom of the tailgate. Then the two side roof stripes. Lowering the gate a little to facilitate installation, cross the elastic band that joins both side strips. Finish lifting the gate.

 

The part that separates the tent from the camper van has two velcro pieces on the upper part. The next step is to join this part with the sides of the rear tent. Separate the velcro, surround the pistons that raise the gate, and reattach the velcro. 

 

In case you want an extra fastening, you can stick some pieces of self-adhesive velcro on the inside of both sides of the camper and the top, as shown in the video. The cabin already incorporates stitched velcro, which will be attached to the self-adhesive.

 

Fiberglass rods and pegs will only be necessary on windy days. The inferior part of the cabin has a hem where you can put in the rods. The four rubber anchor bands and pegs will hold the tent to the ground.

TECHNICAL CHARACTERISTICS

 

The tent manufactured with 190T nylon fabric is water-proofed on both sides, with anti UV treatment and reinforced seams. It is a robust and light material, absolutely water-proof, highly resistant to wind, blows, and tears.

 

The pack includes a practical bag with a shoulder strap, which contains the tent, fiberglass rods, and four (4) tent metal pegs.

 

Dimensions: 55x15x15 cms

 

Approximate weight: 2.00 kg

 

Color: Grey



YOU MAY ALSO BE INTERESTED IN: